Moving into a new home is exciting, particularly when you discover you’ve inherited an original fireplace or wood-burning stove.
But before putting a couple of logs on and lighting it to “see if it works”, there’s one important question:
Do you actually know the history of the fireplace, stove and chimney?
At Chimney Power Sweeping Ltd, we regularly inspect fireplaces and wood-burning stoves for people who have recently moved into properties across Richmond, Twickenham and surrounding areas of West London.
And one of the first things we ask isn’t about the chimney.
It’s:
“Have you used a wood burner or open fire before?”
Someone who has previously owned a stove will usually have a very different level of experience from someone lighting one for the first time.
We then want to know whether the new homeowner has used this particular appliance, what they’ve been told about it and whether there’s any evidence of when it was last professionally swept, serviced or inspected.
Because however good a fireplace or stove looks from the room, you can’t see what’s happening several metres above it inside the chimney.
The Previous Owner Said the Chimney Was Swept – Is That Enough?
Not necessarily.
If there’s a recent chimney sweeping certificate from a recognised professional, that’s useful information.
But if someone simply tells you:
“Don’t worry, it was swept recently,”
we wouldn’t rely on that alone.
Chimney sweeping in the UK is an unregulated trade. That means someone can potentially purchase equipment and advertise themselves as a chimney sweep without completing recognised professional training or qualifications.
We’ve attended properties where customers have been told a stove was recently swept, only for us to remove the baffle plate and find significant deposits sitting above it.
In some cases, it appears that the visible firebox has simply been vacuumed rather than the complete flue system being properly swept and checked.
When you’ve just purchased a property and don’t know its history, our preference is simple:
Start again with a proper sweep and inspection so you know where you stand.
What Can a Chimney Sweep Tell a New Homeowner?
A professional sweep gives us considerably more information than simply whether there’s soot inside the chimney.
The deposits we remove can provide clues about how the appliance has previously been used and what may have been burned.
During the appointment we’re also looking at the appliance, chimney and flue system.
If it’s a stove, we’ll typically be considering things such as:
- Door condition
- Door rope and seals
- Glass condition
- Firebricks
- Baffle plate
- Grate
- Ash pan
- Air controls
- Stove pipe
- Seals around connections
- Unused/blanked appliance outlets
- Flue or liner arrangement where visible
We then finish with appropriate testing to help establish whether the chimney is drawing and discharging as expected.
What Can the Stove Glass Tell Us?
Quite a lot.
One of the first things we’ll look at when approaching an unfamiliar stove is the glass.
Is it relatively clean?
Is it heavily blackened?
Is it cracked?
Has the surface become cloudy or hazed?
Heavy black deposits can indicate poor combustion or unsuitable/wet fuel, while other types of staining or deterioration can give us further clues about how the appliance has previously been operated.
Then we look around the stove.
We’re checking for things such as heat damage or charring to nearby materials, the size and condition of the hearth and whether anything about the installation immediately looks unusual.
Sometimes the warning signs are there before we’ve even picked up a sweeping rod.

Don’t Assume the Correct Parts Are Inside the Stove
Another problem we occasionally encounter is replacement components that aren’t actually intended for that particular appliance.
Someone may have replaced a grate, firebrick, baffle or another component with something from a different stove because:
“It fitted.”
But fitting physically doesn’t necessarily mean it’s the correct component.
Stove components are designed to work together to control combustion and the movement of gases through the appliance.
That’s why our inspection isn’t simply about whether the stove looks attractive from the outside. We want to know whether its working components are present, correctly positioned and in suitable condition.
Does My Existing Wood Burner Need a Chimney Liner?
This is an area where homeowners can understandably become confused.
Finding an older stove without a flexible liner doesn’t automatically tell us whether it can or can’t be used. Existing installations need to be assessed on their individual construction and condition.
However, one issue we regularly encounter with older unlined stove installations is lack of access for sweeping and cleaning.
We’ve seen stoves connected into chimney systems where soot and debris can accumulate above a register or closure plate but there’s no suitable access hatch to remove it.
That can potentially leave years of deposits sitting in an area the homeowner can’t see.
Where an existing system doesn’t have suitable cleaning access, we can discuss the appropriate options. Depending on the installation, this might involve creating suitable sweep access or considering a properly installed flue liner.
The important point for a new homeowner is:
Don’t assume that because the stove has been there for years, everything behind it must be correct.
Chimney Liners Don’t Last Forever
If the chimney does have a liner, we still want to consider its condition.
Liners can deteriorate over time. How quickly this happens can depend on numerous factors, including the liner specification, installation, appliance use, fuel and maintenance.
That’s another reason why knowing the history of an inherited stove is useful.
You may be looking at a relatively recent installation with full documentation : or a system that’s been operating for many years with little information about what’s hidden inside the chimney.
Where necessary, internal CCTV inspection can help us investigate areas that aren’t otherwise visible.
What If the Fireplace Hasn’t Been Used for 10 or 20 Years?
A fireplace being unused doesn’t mean nothing has happened inside its chimney.
Quite the opposite.
Over many years, we can potentially find:
- Bird nesting material
- Debris
- Water ingress
- Deteriorating mortar
- Damaged masonry
- Internal collapse
- Previous building alterations
- Materials deliberately placed into the chimney
The chimney has continued to experience rain, wind and changing temperatures even though nobody has been lighting a fire beneath it.
Moisture entering masonry and repeated heating and cooling cycles over many years can contribute to deterioration.
So if you’ve bought a property with a beautiful old fireplace that hasn’t been used for decades, don’t simply clean the grate, buy some logs and light it.
Have the chimney checked first.
Bird Nests Are Extremely Common in Unused Chimneys
We remove a large number of bird nests from chimneys.
An open, unused chimney can be an ideal nesting location : sheltered, protected and largely undisturbed.
The homeowner may have absolutely no idea there’s nesting material several metres above the fireplace.
This is particularly relevant where fireplaces have been removed or abandoned but the chimney pot has been left open.
If a chimney is no longer going to be used, it should be dealt with appropriately rather than simply forgotten about.

You’d Be Surprised What We Find Inside Old Chimneys
Bird nests aren’t the strangest things we find.
We’ve removed newspaper, bags, carpet and other materials that appear to have been pushed into old chimneys, often in an attempt to stop cold draughts.
We’ve also encountered debris associated with previous building work.
The problem comes years later when a different homeowner moves in.
They see a fireplace.
They don’t see what a previous owner pushed several feet up the chimney.
This is another reason we don’t recommend simply lighting an unknown fireplace to find out whether it works.
What If I’ve Moved In and the Fireplace Is Boarded Up?
A boarded fireplace doesn’t necessarily mean the chimney itself has been permanently taken out of use.
If a new homeowner wants to investigate whether the fireplace could potentially be used again, the first step is to establish what’s actually behind the board and what condition the chimney is in.
Depending on what we find, that can involve:
- Opening the fireplace appropriately.
- Inspecting the fireplace and chimney opening.
- Sweeping the chimney.
- Carrying out an internal camera inspection where appropriate.
- Smoke testing.
- Checking the chimney termination externally.
Only once we understand what is there can sensible decisions be made about whether the fireplace can be returned to use and what work may be required.
What If I Only Want the Fireplace as a Decorative Feature?
That’s absolutely fine.
But we would still recommend dealing with the chimney properly.
Our preference is to have the chimney swept and cleared first, so you know that old soot, nesting material and other debris have been removed.
The redundant flue can then be appropriately protected while maintaining the ventilation it needs.
A phrase we often use with customers is:
“The chimney is like the lungs of the house : it needs to breathe.”
Completely sealing an old chimney without considering ventilation can encourage condensation and damp problems.
We therefore use suitable ventilated caps or terminations where appropriate, helping to prevent rain and birds entering while still allowing airflow through the redundant flue.
Could My Chimney Be Causing a Damp Problem?
If there’s damp appearing on or around a chimney breast, the chimney should certainly be considered as a possible source.
Potential causes can include:
- Water entering an open chimney pot
- Damaged or inappropriate caps or cowls
- Defective lead flashing
- Deteriorated chimney masonry
- Failed flaunching
- Roof defects around the stack
- Blocked or poorly ventilated redundant flues
- Condensation within the chimney
The visible damp patch may be downstairs, while the source of the water could be several metres above it.
That’s one of the situations where an external inspection can be extremely useful.
What Can the Chimney Pot or Cowl Tell Us?
We start gathering information before we even enter the house.
Looking at the top of the chimney can tell us a surprising amount.
If we see an appropriate cowl on an active chimney, that’s useful information.
If we see a capped pot, we know that flue was probably intended to be taken out of use.
If the customer tells us they’re using a particular fireplace but we can see that its corresponding chimney is capped, we immediately have something to investigate.
Similarly, if we’re told there’s a wood-burning stove but the chimney termination doesn’t appear consistent with what we’d expect from the installation, we’ll want to understand why.
What’s happening on the roof can tell us a lot about what’s happening below it.
Why CCTV Is Included in Our New Homeowner Chimney Inspection
For our New Homeowner Package, internal CCTV inspection forms an important part of understanding an unfamiliar chimney.
We’re not just looking for soot.
We’re looking for things such as:
- Internal deterioration
- Collapsed masonry
- Damage or obvious holes
- Unexpected obstructions
- Building alterations
- Pipes crossing chimney areas
- Timber or building materials within the flue
- Inappropriate materials used during previous works
- Condition of the flue or liner where visible
We’ve encountered situations where building work has interfered with a chimney without the current homeowner having any idea.
That’s precisely the type of hidden issue a normal visual inspection from the fireplace can’t reveal.

Why We May Use a Drone to Inspect the Chimney
Our internal camera shows us what’s happening inside.
Our drone can give us another perspective outside.
If there are signs of damp or we have concerns about the external chimney, a drone inspection can help us look at areas such as:
- Chimney pots
- Cowls and caps
- Chimney stack condition
- Flaunching
- Lead flashing
- Nearby roof areas
- Slipped or damaged tiles
It can also be extremely useful when a chimney stack has several pots and we want a clearer view during smoke testing.
Why a Smoke Test Is So Important
A chimney can sometimes appear to sweep perfectly normally.
The rods travel through.
They reach the top.
Everything feels right.
Then the smoke test tells us something different.
If smoke introduced into one flue starts appearing from two chimney pots, it can indicate communication between neighbouring flues.
In an older chimney, one possible cause is deterioration or collapse of the masonry separating them : often referred to as the mid-feathers.
And the failure doesn’t necessarily have to be directly in the flue you’re using.
Smoke and combustion gases may potentially escape into another redundant flue or other parts of the building.
This is why we don’t consider the job finished simply because our rods reached the chimney pot.
Sweeping tells us one part of the story. Testing helps tell us the rest.
Which Chimney Pot Belongs to My Fireplace?
This can be confusing in older Richmond and Twickenham properties.
You may have one fireplace but look outside and see four chimney pots.
Historically, many Victorian and Edwardian houses had multiple fireplaces : commonly serving downstairs reception rooms and upstairs bedrooms.
Those fireplaces may have been removed over the years while the chimney stack and pots remained.
A smoke test is one of the most reliable practical ways of identifying which active flue terminates at which pot.
This can become particularly important where parts of the original chimney system have been altered or taken out of use.
Common Fireplace Problems in Victorian and Edwardian Homes
We work on many older properties around Richmond, Twickenham and West London, and original fireplaces can have their own particular maintenance issues.
One example is an original tiled fireplace surround.
Over many decades, grout, mortar or backing materials can deteriorate, creating small gaps that aren’t immediately obvious.
During sweeping or smoke testing, we can sometimes identify soot or smoke escaping through these areas.
Another issue we encounter with older open fireplaces is a void behind the fire chair.
Instead of the rear area being appropriately formed so soot and debris can be removed through the fireplace opening, deposits can disappear behind the fire chair and accumulate in an inaccessible void.
We’ve carried out remedial work on fireplaces where these areas need to be cleaned and correctly formed to prevent further accumulation.
These are exactly the sort of details that can be missed when someone simply looks at an attractive original fireplace and assumes it’s ready to use.
Open Fire or Wood Burner? Richmond & Twickenham Homes Have Both
Across Richmond and Twickenham, we encounter a real mixture.
Some homeowners want the efficiency and controllability of a modern wood-burning stove.
Others specifically bought their property because they love its original open fireplace and want to preserve that feature.
Both can be enjoyed, but both require appropriate maintenance.
Older fireplaces may need repairs and maintenance to retain their character while allowing them to operate correctly.
Existing stoves need their appliance components, chimney or flue and installation checked.
The objective isn’t to turn every open fireplace into a stove.
It’s to understand what you’ve inherited and how to look after it properly.
Bought a House With a Wood Burner but No Paperwork?
If you’ve inherited a stove but can’t find any installation paperwork, don’t panic : but don’t simply assume everything is correct either.
Our first recommendation would be to have the stove and chimney swept, inspected and tested.
That gives us an opportunity to look for obvious issues and establish a baseline for future maintenance.
You can also investigate whether the installation was previously notified through HETAS.
Check Whether the Stove Was Registered With HETAS
Where qualifying work has been carried out and registered through a HETAS Registered Installer, the installation is notified and a HETAS Certificate of Compliance is issued.
The registered information can include details relating to the installed appliance and flue system.
If you’ve moved into a property and the original certificate has disappeared, it’s worth contacting HETAS to establish whether a record exists and whether a replacement certificate can be obtained.
However, paperwork tells you about the installation at the time it was registered.
It doesn’t tell you what has happened to the stove and chimney during all the years since.
That’s why documentation and a current physical inspection serve different purposes.
Every Home With a Working Fireplace or Stove Needs a Carbon Monoxide Alarm
A working carbon monoxide alarm is an essential safety measure around solid-fuel appliances.
This becomes particularly important when you’ve inherited a fireplace and don’t know its history.
Open fireplaces with unprotected chimney pots can be particularly vulnerable to bird nesting and unexpected blockages, but any combustion appliance can potentially present a carbon monoxide risk if something isn’t operating correctly.
A carbon monoxide alarm isn’t a substitute for sweeping, servicing or proper installation.
It’s another important layer of protection.
If a CO alarm activates while you’re using your stove or fireplace, stop using the appliance, follow the alarm manufacturer’s safety instructions and don’t use the fire again until the cause has been investigated.
How to Store Logs Properly at Your New Home
Once we’ve established that a stove is ready to use, there’s another subject we regularly discuss with new homeowners:
Where are you going to keep your logs?
Buying dry wood doesn’t mean it will remain dry if it’s stored badly.
Leaving logs exposed to rain or in an open area where they continually absorb moisture can result in the fuel becoming progressively wetter.
We prefer a properly sheltered log store that protects the wood from direct rain while still allowing air to circulate.
Good fuel, good storage and correct burning technique all contribute to cleaner and more efficient stove operation.
One of the Biggest New-Homeowner Mistakes: Assuming Lighting a Fire Is Simple
People sometimes assume using a wood burner is simply:
Put wood in → light it → shut the door.
There’s a little more to it.
As part of our New Homeowner Package, we don’t just inspect the chimney and leave.
We can show the homeowner:
- How to light the appliance
- How to establish the initial draught
- How the air controls operate
- How to add fuel correctly
- What fuel to use
- How to store logs
- What warning signs to watch for
- When the chimney should next be swept
Our objective is that when we’ve finished, the new homeowner doesn’t simply have a swept chimney.
They understand how to use what they’ve inherited.
You’ve Bought the House – Check the Real Fire Inside It
This is probably the most important point in this entire guide.
A property in Richmond or Twickenham can represent an investment of hundreds of thousands of pounds : and potentially considerably more.
Most homeowners wouldn’t think twice about having a boiler checked or arranging other important property inspections.
Yet an inherited fireplace can sometimes be treated differently.
It’s worth remembering what you’re actually doing:
You’re lighting a real fire inside your home.
You may have no idea who installed the stove, what’s inside the chimney, when it was last properly swept, whether birds have nested in it, whether previous building work has affected the flue or how the previous owners operated it.
For the relatively small cost of having it professionally checked, we’d much rather give a new homeowner the reassurance that they understand what they’ve got before they light it.
Our New Homeowner Chimney & Fireplace Packages
At Chimney Power Sweeping Ltd, we’ve developed New Homeowner Packages for people who inherit either an open fireplace or wood-burning stove when moving home.
Depending on the appliance and property, the service can include:
- Professional chimney sweeping
- Appliance or fireplace inspection
- Internal CCTV chimney inspection
- External chimney inspection
- Smoke testing
- Stove condition checks
- Chimney pot and cowl checks
- Advice on any defects we discover
- Demonstration of how to light and operate the fire
- Fuel and log-storage advice
- Answers to questions about the fireplace or stove
- Digital certification and records
- Annual sweeping reminders
Where additional external investigation is appropriate, we also have drone inspection equipment available.
Our aim is simple.
By the time we’ve finished, we want you to understand what you’ve inherited, how to use it and whether there are any issues that need attention.
New Homeowner Chimney Inspections in Richmond & Twickenham
If you’ve recently moved into a property in Richmond or Twickenham and don’t know the history of your fireplace or wood burner, our New Homeowner Package is designed specifically for this situation.
Chimney Power Sweeping Ltd provides chimney sweeping, stove servicing, CCTV chimney inspections, drone inspections, bird nest removal, cowls and caps, fireplace maintenance and HETAS stove and flue installation services throughout Richmond, Twickenham and surrounding areas of West London.
We’re HETAS Approved, NVQ Level 2 qualified, members of the Guild of Master Chimney Sweeps and fully insured.
Whether you’ve inherited an original Victorian fireplace, an older wood burner or a modern stove with very little paperwork, don’t rely solely on how it looks from the room.
Have it swept, inspected and tested before you light it.
Frequently Asked Questions for New Homeowners
I’ve just moved into a house with a log burner. Can I use it?
If you don’t know the appliance or chimney’s maintenance history, we’d recommend having it professionally swept, inspected and tested before using it.
The previous owner said the chimney was recently swept. Should I have it swept again?
If there’s reliable recent documentation from a professional sweep, that provides useful information. If there’s no certificate or you’re uncertain about what was actually done, having it checked gives you a known starting point.
My fireplace hasn’t been used for years. Is it safe to light?
Don’t assume so. Unused chimneys can contain bird nests, debris or materials placed inside by previous occupants and may have deteriorated over time. Have it checked before returning it to use.
Can I find out whether my inherited stove was HETAS registered?
If qualifying installation work was registered through HETAS, a record should exist. If the certificate is missing, contact HETAS to check the installation record and ask about obtaining a replacement Certificate of Compliance.
Does an old wood burner have to have a chimney liner?
Not every existing older installation will necessarily have a flexible liner. The complete system needs to be assessed, including its construction, condition and whether suitable access exists for sweeping and maintenance.
Why does my house have four chimney pots but only one fireplace?
Older Victorian and Edwardian homes often originally had several fireplaces serving downstairs rooms and bedrooms. The fireplaces or chimney breasts may have subsequently been removed while other sections of the original flues and chimney pots remain.
Should an unused chimney be completely sealed?
A redundant chimney needs to be dealt with appropriately, including consideration of ventilation. Completely sealing a flue without allowing it to breathe can contribute to condensation and damp problems.
Do I need a carbon monoxide alarm with an open fire or log burner?
A suitable carbon monoxide alarm is an important safety measure for homes with solid-fuel appliances. It complements : rather than replaces : regular sweeping, maintenance and proper installation.
About Chimney Power Sweeping Ltd
Chimney Power Sweeping Ltd provides professional chimney sweeping and complete chimney-care services across Richmond, Twickenham, West London, Buckinghamshire, Berkshire and surrounding areas.
Our services include chimney sweeping, stove servicing, CCTV inspections, drone inspections, bird nest removal, chimney cowls and caps, fireplace maintenance and HETAS stove and flue installations.
By combining professional sweeping with modern inspection equipment, our aim is to establish not simply whether a chimney is clean, but whether the complete fireplace, stove and flue system is ready to use.
More than just a sweep.

