You are currently viewing Why Is My Wood Burner Suddenly Using More Logs Than Last Winter? – Princes Risborough & Haddenham

Why Is My Wood Burner Suddenly Using More Logs Than Last Winter? – Princes Risborough & Haddenham

If your wood burner seems to be getting through far more logs than it used to, it is easy to assume the firewood is simply burning faster.

Sometimes that is true.

But if the stove was using noticeably less fuel last winter and now seems to need constant refuelling to produce the same heat, there may be another reason.

At Chimney Power Sweeping Ltd, we work throughout Princes Risborough, Haddenham and surrounding areas, and changes in fuel use can often tell us something about how well a stove and chimney are working together.

A stove that suddenly uses more logs may be affected by:

  • wetter fuel
  • poor combustion
  • worn door seals
  • chimney draught changes
  • stove components needing attention
  • changes in how the appliance is being operated
  • a colder room or increased heating demand

The useful question is not simply:

“Why am I burning more wood?”

It is:

“What has changed since last winter?”

1. Your Firewood May Be Wetter Than Last Year

This is one of the first things worth checking.

Wood can look perfectly dry on the outside while still holding a significant amount of moisture internally.

Wet wood wastes energy.

Before the wood can burn efficiently, heat from the fire first has to drive off the water contained within it.

That can result in:

  • lower fire temperatures
  • less useful heat into the room
  • more smoke
  • increased soot
  • black stove glass
  • more logs being needed to maintain the same temperature

For stove use, wood should generally have a moisture content below 20%.

How to Check Firewood Properly

A moisture meter is one of the simplest tools a stove owner can have.

For a useful reading:

  1. Split a log.
  2. Test the freshly exposed centre.
  3. Avoid relying only on the outside surface.

Testing the inside gives a much better idea of the actual moisture content.

Two batches of logs can look almost identical but burn very differently.

2. Different Types of Wood Burn Differently

Not every log contains the same amount of useful energy.

Different species, log sizes and densities can affect how quickly the fire burns.

For example, a load of smaller, lighter logs may appear to disappear much faster than larger dense hardwood logs.

This means a change of supplier or fuel type can sometimes explain why you seem to be refuelling more frequently.

However, if the fuel is similar to what you used previously and consumption has increased significantly, it is worth looking at the stove as well.

3. Is the Room Simply Colder This Year?

Before assuming there is a fault, it is worth ruling out the obvious.

You may be using more logs simply because:

  • the weather is colder
  • the stove is being used for longer each day
  • doors to other rooms are being left open
  • the property is taking longer to warm
  • more of the house is being heated than before

A stove that used to heat one room may now be expected to warm a much larger area.

That matters.

Has the Property Changed?

If the home has been extended, opened up or remodelled, the stove may now be heating more space than it originally did.

For example:

  • a wall may have been removed
  • a rear extension may have been added
  • doors may now be left open between rooms
  • the stove may be expected to heat a larger open-plan area

In that situation, the stove itself may not be faulty at all.

It may simply be working harder to meet a greater heat demand.

4. Worn Door Rope Can Allow Too Much Air Into the Stove

The rope seal around the stove door is an important part of controlling combustion.

When you move the stove’s air controls, you should be changing how much air enters the appliance.

But if the door rope is no longer sealing correctly, additional air can enter around the door.

This can make the fire burn faster than intended.

Signs of a deteriorating rope seal can include:

  • logs burning unusually quickly
  • difficulty slowing the fire down
  • air controls appearing less effective
  • visible damage to the rope
  • flattened or hardened rope
  • an unusually fierce fire

The Door Can Close and Still Leak Air

A stove door may feel as though it closes perfectly normally.

That does not automatically mean the seal is good.

Over time, rope compresses and loses its ability to seal tightly.

This is something we can check during stove servicing.

5. A Damaged Glass Seal Can Affect Combustion Too

The glass itself normally has a sealing system.

If this deteriorates, air can enter around the glass rather than through the stove’s designed air controls.

Again, this can make the stove harder to control.

A stove that suddenly seems to burn aggressively even when the air controls are reduced may deserve closer inspection.

Why Is My Wood Burner Suddenly Using More Logs Than Last Winter? – Princes Risborough & Haddenham

6. Your Stove May Be Drawing Too Strongly

We often talk about poor chimney draught.

But excessive draught can cause problems too.

If a chimney is pulling very strongly, combustion gases can move through the stove faster than intended.

This can make logs burn more rapidly.

Possible influences include:

  • chimney height
  • weather conditions
  • wind
  • changes to the chimney terminal
  • stove installation
  • the flue system

More Draught Is Not Always Better

A strong chimney draught might sound ideal, but a stove is designed to operate within a certain range.

Too little draught can create poor combustion and smoke problems.

Too much can make the stove difficult to control and increase fuel consumption.

The aim is for the appliance and chimney to work together correctly.

7. Your Stove May Be Running Too Hot

Some homeowners become used to running their stove with large, powerful flames because it looks as though the fire is working well.

But constantly operating at excessive temperatures can waste fuel and potentially place unnecessary stress on the appliance.

Signs that you may be overfiring include:

  • extremely rapid fuel consumption
  • a stove that feels difficult to control
  • unusually high stove temperatures
  • parts of the stove becoming excessively hot
  • air controls making little difference

A suitable stove thermometer can help some users understand how their appliance is operating, but always follow the manufacturer’s instructions for your specific stove.

8. The Baffle Plate Could Be Damaged or Incorrectly Positioned

The baffle is an important internal component.

It helps control the route taken by hot gases before they leave the stove and enter the chimney.

If the baffle is:

  • incorrectly positioned
  • damaged
  • warped
  • missing
  • fitted the wrong way around

the stove’s performance can change.

Hot gases may leave the appliance more quickly than intended rather than transferring as much heat into the stove body and room.

This can result in more fuel being required to maintain the same comfort level.

Has the Baffle Been Removed Recently?

This is worth considering if the problem started after the stove was cleaned.

We do sometimes find baffles that have been removed and accidentally refitted incorrectly.

The stove will often still burn, but it may not behave as it did before.

9. Fire Bricks Can Affect How the Stove Retains Heat

Fire bricks help protect the stove body and maintain heat within the firebox.

Small surface cracks can sometimes be normal depending on the stove and brick.

But heavily damaged, missing or deteriorated bricks may affect the way the appliance performs.

During servicing, we can inspect the bricks and advise if any need replacing.

10. Poor Combustion Can Make You Burn More Wood

It may seem contradictory, but a stove can burn badly and still use lots of logs.

If combustion is inefficient, much of the potential energy in the wood is not being turned into useful room heat.

Instead, you may see:

  • sluggish flames
  • smoke
  • black glass
  • heavier soot
  • low stove temperatures

You then add more wood because the room is not getting warm enough.

So an inefficient fire can result in high fuel consumption even though the logs themselves are not burning fiercely.

11. A Partially Restricted Chimney Can Reduce Efficiency

A partial chimney restriction does not always stop the stove from working.

It may simply reduce draught enough to affect combustion.

Possible restrictions include:

  • soot deposits
  • tar
  • debris
  • nesting material
  • damaged liner sections
  • restricted chimney terminals

If the stove cannot move combustion gases efficiently, it may become sluggish and produce less useful heat.

The homeowner then compensates by adding more fuel.

This is why regular chimney sweeping remains important even when the fire appears to be operating.

12. Your Chimney Cowl May Have Changed

Cowls can become damaged or restricted over time.

Bird guards can collect debris.

Parts can deteriorate.

And occasionally we find unsuitable cowls that have been fitted to live appliances.

A change at the top of the chimney can alter the draught throughout the entire system.

If your stove suddenly starts behaving differently without any obvious change inside the room, the chimney terminal is worth considering.

13. Changes to the House Can Affect Stove Performance

The stove may be exactly the same.

The chimney may be exactly the same.

But the house may have changed.

For example, perhaps you have installed:

  • new double glazing
  • new external doors
  • a kitchen extension
  • a powerful extractor fan
  • additional insulation
  • a loft conversion

These changes can affect ventilation and air pressure within the property.

A stove needs air to burn.

If the available airflow changes, combustion can change too.

Why Does My Stove Need Refuelling So Often?

Frequent refuelling can happen for two very different reasons.

The Logs Are Burning Too Fast

This means the fire is consuming fuel more quickly than it should.

Possible causes include:

  • worn door seals
  • glass seal leaks
  • excessive chimney draught
  • air controls left too open
  • small lightweight logs
  • overfiring

In this situation, the stove may look very lively and produce plenty of flame, but the logs disappear quickly and the fire can be difficult to control.

The Logs Are Burning Too Poorly

This is the opposite problem.

The logs may not disappear quickly, but they are producing very little useful heat.

Possible causes include:

  • wet wood
  • insufficient air
  • chimney restriction
  • blocked internal airways
  • low-temperature burning

In this situation, you keep adding more logs simply because the room is not warming up.

So “using too much wood” can mean either:

the fuel is burning too fast

or

the fuel is not burning efficiently enough.

That distinction is one of the most useful clues when trying to work out what is wrong.

How Much Wood Should a Stove Use?

There is no single correct number of logs per hour.

Fuel consumption depends on:

  • stove size
  • heat output
  • room size
  • property insulation
  • outside temperature
  • type of wood
  • moisture content
  • log size
  • how the stove is operated

This is why comparing your stove directly with somebody else’s is not always helpful.

A much better comparison is with your own stove last winter.

If nothing else has changed but fuel use has increased noticeably, that is useful information.

Could the Stove Be Too Small for the Space?

Sometimes the issue is not that the stove has become less efficient.

The space it is being asked to heat may simply be too large.

If the property has been extended or made more open-plan, an appliance that previously coped well may now be operating close to its limits.

That can lead to:

  • more frequent refuelling
  • longer burning periods
  • difficulty getting the room warm
  • the stove being operated harder than before

This does not automatically mean a new stove is needed, but it is another factor worth considering when fuel use changes after alterations to the house.

What Does the Stove Glass Tell You?

Stove glass can provide another clue.

Glass Staying Relatively Clear but Logs Burning Very Fast

This might lead us to consider:

  • excess airflow
  • worn seals
  • strong chimney draught
  • how the controls are being used

Glass Turning Black While You Use More Logs

This may point more towards:

  • wet wood
  • low-temperature burning
  • poor airflow
  • reduced chimney draught
  • inefficient combustion

The glass does not diagnose the problem on its own.

But together with fuel consumption and flame behaviour, it can help build a clearer picture.

What Is Normal – and What Is Worth Checking?

Not every increase in firewood use means there is a fault.

Usually Not Immediately Concerning

You may simply use more wood if:

  • there is a cold snap
  • the stove is being used for longer periods
  • more rooms are being heated
  • the logs are smaller than usual
  • you have changed fuel type

Worth Investigating

We would pay more attention if:

  • you are using much more wood but getting less heat
  • logs burn uncontrollably fast
  • the air controls no longer seem effective
  • the stove glass has started blackening heavily
  • the stove has become difficult to light
  • the chimney draught has changed
  • there is excessive soot or tar
  • the problem appeared suddenly without an obvious reason

The key is not a slight change in fuel use.

It is a significant change in how the stove behaves.

What Do We Ask When a Customer Says Their Stove Is Using Too Much Wood?

We normally start by asking what has changed.

For example:

  • Is it the same fuel supplier?
  • Have you measured the moisture content?
  • Are the logs a different size?
  • Is the stove burning faster or simply producing less heat?
  • Can you still control the fire using the air controls?
  • Is the glass staying clean?
  • When was the stove last serviced?
  • When was the chimney swept?
  • Has the baffle recently been removed?
  • Has anything been changed on the chimney?
  • Has the property recently been renovated?
  • Has the heated area become larger?
  • Does the problem change depending on the weather?

The answers help us decide whether the issue is more likely to involve fuel, operation, servicing, heating demand or chimney performance.

Why Princes Risborough and Haddenham Homes Can Have Very Different Stove Requirements

Princes Risborough, Haddenham and the surrounding areas include everything from older cottages and period properties to larger detached homes, converted buildings and modern houses.

Some properties have large rooms and older construction.

Others have been significantly renovated and insulated.

Many homeowners in these areas also use their stoves regularly rather than only on occasional weekends.

That means a small change in stove efficiency can become very noticeable over a full winter.

If you are buying and storing a significant amount of firewood, even a modest increase in fuel consumption matters.

That makes it worthwhile understanding whether the difference is simply colder weather or whether the stove and chimney are no longer performing as they should.

What Can a Stove Service Check?

If your chimney is clear but the stove appears to be using significantly more fuel, servicing may be worthwhile.

Depending on the appliance, we can check:

  • door rope
  • glass seals
  • fire bricks
  • baffle plate
  • internal components
  • air controls
  • accessible connections
  • general condition of the appliance

Sometimes a relatively small maintenance issue can make a noticeable difference to how controllable the stove feels.

What Can Chimney Sweeping Tell Us?

A sweep can provide useful information too.

We can see:

  • how much soot has accumulated
  • whether deposits are dry or tar-like
  • whether there is debris
  • whether the flue appears restricted
  • whether anything unusual is removed during sweeping

The type and quantity of deposits can sometimes give us useful clues about how the stove has been burning.

When Might CCTV Chimney Inspection Be Useful?

Using more firewood alone would not normally mean you automatically need a CCTV inspection.

But if there are other symptoms, such as:

  • poor draught
  • unexplained smoke
  • unusual debris
  • suspected liner damage
  • recurring restrictions

then an internal chimney camera can help us investigate areas that cannot otherwise be seen.

We prefer to use further investigation where there is a reason rather than simply recommending it as standard.

What Can You Check Yourself First?

Before assuming there is a fault, there are several useful checks you can make.

Measure Your Firewood

Check the moisture content below the surface.

Think About Your Fuel

Has the supplier, species or log size changed?

Watch the Fire

Is it burning fiercely or struggling?

Check the Stove Glass

Is it staying clear or turning black?

Try the Air Controls

Does the fire respond normally when you adjust them?

Think About the Room

Are you heating more space or using the stove for longer than before?

Think About Maintenance

When were the chimney and stove last properly maintained?

These simple observations can help considerably.

When Is High Fuel Consumption a Sign of a Bigger Problem?

Using a few more logs during colder weather is normal.

But it is worth investigating if the increase is accompanied by:

  • smoke entering the room
  • a stove that cannot be controlled
  • excessive temperatures
  • strong tar smells
  • rapidly blackening glass
  • poor heat output
  • unusual chimney deposits
  • a carbon monoxide alarm activation

If a CO alarm activates, stop using the appliance and investigate the cause.

Chimney Sweeping and Stove Servicing in Princes Risborough & Haddenham

At Chimney Power Sweeping Ltd, we provide professional chimney and stove services throughout Princes Risborough, Haddenham and surrounding areas.

Our services include:

We are HETAS Approved, NVQ qualified and members of the Guild of Master Chimney Sweeps.

If your stove is suddenly getting through much more fuel, our aim is not simply to tell you to buy more logs.

We want to understand why the appliance is behaving differently.

Is Your Wood Burner Using More Logs Than Last Winter?

If you are in Princes Risborough, Haddenham or the surrounding area and your stove suddenly seems much hungrier for firewood, start by asking what has changed.

Check the logs.

Check the moisture.

Watch how the fire burns.

See whether the air controls still make a noticeable difference.

Think about whether the room or property has changed.

And consider when the stove and chimney were last serviced and swept.

Sometimes the answer is simply colder weather or a different batch of firewood.

Sometimes a worn seal or incorrectly positioned component is letting the fire burn too quickly.

And sometimes the stove is using more fuel because it is actually burning less efficiently.

The amount of wood you use can be one of the clearest clues that something in the system has changed.

Why Is My Wood Burner Suddenly Using More Logs Than Last Winter? – Princes Risborough & Haddenham